Quick Contact Form at the Bottom of Every Page      01458223236

Frac tanks

Marine Fabrication are one of the Global Leaders in The Fabrication of Frac Tanks

Corrugated Wall/ Liquid Frac Tanks

Corrugated Wall/ Liquid Frac Tanks come equipped with new running gear and 10 mil DFT chemical resistant liners. All frac tanks are steel grit blasted and painted to Your specs. Frac Tanks are built from new 1/4″ Heavy Duty Corrugated Steel.
Specifications

  • Floor: 1/4″ PL, V-Bottom with integral formed side channels
  • Floor Support: 10″ channel longitudinal runners with 8″ channel and formed 1/4″ PL channel cross members
  • Walls: 1/4″ PL solid welded, corrugated steel, corrugations 15″ on center
  • Roof: Flat top, 1/4″ PL solid welded with channel supports outside
  • Front/Rear: 1/4″ PL solid welded, corrugated steel, 10″ radius at vertical outside corners
  • Drain/Fill: 4″ floor drain at rear end, 3″ fill pipe to roof at rear, 4″ suction line connection at front, 4″ mid high connection at front, 8″ flanged front manifold connection with turn down to floor sump
  • Man way: 21″ man way on front, side, (3) non-sealed hatches on roof
  • Pick Up: Standard 5th wheel king pin
  • Welds: All welds continuous except substructure cross members
  • Axle: 25,000 lb. axle with air brakes, 11.00 x 22.5 bias tires on steel disc wheels
  • Access: Front stairway
  • Finish: Per customer specifications
  • Hydro testing: Full capacity static test
  • Dimensions: 45′ long, 8′-6″ wide, 10′ high; 500 barrel capacity
  • Tank pressure/ vacuum relief vent
  • Level gauging
  • Options: Special tank linings, special sizes, open top design, fixed or removable steam coils, 8″ exterior manifold assembly

Corrugated Wall/ Round Bottom Liquid Frac Tank

Corrugated Wall/ Round Bottom Liquid Frac Tanks come equipped with new running gear and 10 mil DFT chemical resistant liners. All frac tanks are steel grit blasted and painted to Your specs. Frac Tanks are built from new 1/4″ Heavy Duty Corrugated Steel.

Specifications:

  • Floor: 1/4″ PL, Round-bottom floor for better drainage
  • Floor Support: 10″ channel longitudinal runners with 8″ channel and formed 1/4″ PL channel cross members
  • Walls: 1/4″ PL solid welded, corrugated steel, corrugations 15″ on center
  • Roof: Flat top, 1/4″ PL solid welded with channel supports outside
  • Front/Rear: 1/4″ PL solid welded, corrugated steel, 10″ radius at vertical outside corners
  • Drain/Fill: 4″ floor drain at rear end, 3″ fill pipe to roof at rear, 4″ suction line connection at front, 4″ mid high connection at front, 8″ flanged front manifold connection with turn down to floor sump
  • Man way: 21″ man way on front, side, (3) non-sealed hatches on roof
  • Pick Up: Standard 5th wheel king pin
  • Welds: All welds continuous except substructure cross members
  • Axle: 25,000 lb. axle with air brakes, 11.00 x 22.5 bias tires on steel disc wheels
  • Access: Front stairway
  • Finish: Per customer specifications
  • Hydro testing: Full capacity static test
  • Dimensions: 45′ long, 8′-6″ wide, 10′ high; 500 barrel capacity
  • Tank pressure/ vacuum relief vent
  • Level gauging
  • Options: Special tank linings, special sizes, open top design,
  • fixed or removable steam coils, 8″ exterior manifold assembly

Smooth Wall V-Bottom Liquid Frac Tank

Smooth Wall V-Bottom Liquid Frac Tanks are steel grit blasted and painted to Your specs. Smooth Wall V-Bottom Liquid Frac Tank are built from new 1/4″ Heavy Duty Corrugated Steel.

Specifications:

  • 1/4″ Steel plate tank construction
  • Smooth interior walls for easier cleaning
  • V-bottom floor for better drainage
  • 3″ fill line
  • Man ways conveniently located on front, side and top
  • 4″ Drains and front inlet/outlet
  • Heavy duty nose bar assembly
  • Flange mount blay lock ll10 p/v vent 16oz pressure
  • 0.4oz Vac setting
  • 2″ Coupling w/plug
  • 4″ Flange w/blind cover
  • 21″ Man way domed lid and bars
  • 3″ Elbow fill line w/cap
  • Safety walk way (36″ grating)
  • Access stairs
  • Level gauge w/8″ stainless steel ball “Y” support holds ball 1″ minimum off floor
  • Front drain w/valve, threaded flange, plug, chain
  • 21″ Man way, domed lid (2)
  • 11.00 x 22.5 Tubeless tire on 10 hole steel wheel
  • Folding hand rails
  • 4″ flange valve, threaded flange, plug, chain remote operation handle
  • 25k axle, automatic slack adjusters, top mounted 30 service chambers, outboard drums, hutch 9700 suspension, 3 leaf high arch springs
  • DOT taillights and lower market lights, no top lights 4″ coupling w/plug

Smooth Wall V-Bottom Liquid Frac Tank

Smooth Wall/Round Bottom Frac Tank are steel grit blasted and painted to Your specs. Smooth Wall/Round Bottom Frac Tanks are built from new 1/4″ Heavy Duty Corrugated Steel.

Standard Features:

  • Smooth Wall/Round Bottom
  • 1/4″ Steel plate tank construction
  • Smooth interior walls for easier cleaning
  • Round-bottom floor for better drainage
  • 3″ fill line
  • Man ways conveniently located on front, side and top
  • 4″ drains and front inlet/outlet
  • Heavy duty nose bar assembly
  • Flange mount Blay lock LL10 P/V vent 16oz pressure, 16oz pressure 0.4oz Vac setting
  • 2″ coupling w/plug
  • 4″ flange w/blind cover
  • 21″ Man way domed lid and bars
  • 3″ elbow fill line w/cap
  • Safety walkway (36″ grating)
  • Access stairs
  • Level gauge w/8″ stainless steel ball “Y” support holds ball 1″ minimum off floor
  • Front drain w/valve, threaded flange, plug, chain
  • 21″ Man way, domed lid (2)
  • 11.00 x 22.5 tubeless tire on 10 hole steel wheel
  • Folding hand rails
  • 4″ flange valve, threaded flange, plug, chain remote operation handle
  • 25k axle, automatic slack adjusters, top mounted 30 service chambers, outboard drums, hutch 9700 suspension, 3 leaf high arch springs
  • DOT taillights and lower market lights, no top lights 4″ coupling w/plug

Smooth Wall V-Bottom Liquid Frac Tank

Smooth Wall/Round Bottom/Dual Manifold Frac Tank are steel grit blasted and painted to Your specs. Smooth Wall/Round Bottom/Dual Manifold Frac Tank are built from new 1/4″ Heavy Duty Corrugated Steel.

Specifications:

  • Smooth interior walls for easier cleaning
  • Round Bottom floor for better drainage
  • 3″ fill line
  • Man ways conveniently located on front, side and top
  • 4″ drains and front inlet/outlet
  • Heavy duty nose bar assembly
  • Rolled Plate Floor
  • 4-Bottom Support Beams
  • 500 BBL Capacity
  • All 1/4 in. Plate Construction
  • Heavy Duty Floor Support Saddle
  • Tank pressure/vacuum relief vent
  • Level gauging
  • Concentric Reducers 3″ x 1 1/2″
  • Two Manifolds: (1) 6″ & (1) 8″
  • Gel Line: Full Length Gel Line With 6 Jet Lines Configured for continous Fluid Movement. Jet Lines Incorporate A 3″ To 1 1/2″
  • Concentric Reduction In Order To Increase Velocity Of The Fluid.
  • Flange Mount Blay lock Ll10 P/V Vent 16oz Pressure, 0.4oz Vac Setting
  • 2″ Coupling W/Plug
  • 4″ Flange W/Blind Cover
  • 21″ Man way Domed Lid And Bars
  • 3″ Elbow Fill Line W/Cap
  • Safety walk Way (36″ Grating)
  • Access Stairs
  • Level Gauge W/8″ Stainless Steel Ball “Y” Support Holds Ball 1″ Minimum Off Floor
  • Front Drain W/Valve, Threaded Flange, Plug, Chain
  • 21″ Man way, Domed Lid (3)
  • 11.00 X 22.5 Tub less Tire On 10 Hole Steel Wheel
  • Folding Hand Rails
  • 4″ Flange Valve, Threaded Flange, Plug, Chain Remote Operation Handle
  • 25k Axle, Automatic Slack Adjusters, Top Mounted 30 Service Chambers, Outboard Drums, Hutch 9700 Suspension, 3 Leaf High Arch Springs
  • Dot Tail Lights And Lower Market Lights, No Top Lights
  • 4″ Coupling W/Plug